Reduce PC-side load before building bigger
Use Hone to clean up background apps and Windows gaming settings before testing SpaceCraft FPS, CPU usage, and online smoothness.
SpaceCraft settings at a glance
Use this as a clean baseline before chasing tiny tweaks. SpaceCraft does not have enough public, repeatable benchmark data yet, so the smart move is simple: use the official requirements, pick a stable FPS target, change one setting at a time, and avoid fake miracle fixes.
What the Steam specs mean
| Tier | Listed hardware | Practical target |
|---|---|---|
| Minimum | Core i3-8350K, 8 GB RAM, GeForce GTX 1060, 25 GB; Steam notes 1080p at 30 FPS | Use Low or Medium, keep background apps closed, and target the most stable cap your PC can hold. |
| Recommended | Core i5-11400T, 16 GB RAM, GeForce RTX 3060, 25 GB; Steam notes 1440p at 60 FPS | Start from the balanced preset, then raise quality only after the game holds your target FPS in a repeatable test route. |
Source note: the requirement details above come from the official Steam page. Developer/publisher listing: Shiro Games. Release state: June 11, 2026 Early Access. Treat early patches as performance-sensitive until stable community data exists.
Skip the fake optimization routine
Do not install random FPS packs, force Realtime process priority, stack three FPS limiters, or copy config commands from another engine without proof they apply to SpaceCraft. Those moves can make frame pacing worse and waste the exact time you wanted to save. Riveting, in the same way a blue screen is riveting.
SpaceCraft is a online space exploration, building, MMO/co-op simulation game, which means the best PC settings should be practical instead of theatrical. The goal is not to max every slider or pretend we have lab-grade benchmarks on day one. The goal is to get stable FPS, clean frame pacing, and predictable input or co-op behavior with settings you can actually test.
This guide gives you a safe baseline for SpaceCraft, then explains what to change first if the game feels choppy, delayed, CPU-heavy, or unstable online. If future patches expose more graphics options, treat this as the starting profile and tune from there.
Best quick settings for SpaceCraft
| Setting | Recommended value | Why |
|---|---|---|
| Display mode | Borderless for online co-op convenience; Fullscreen if you see pacing issues | Use the mode that gives your system the cleanest frame pacing, not the one that sounds most professional. |
| Graphics preset | Medium for recommended PCs; Low for busy hubs, large builds, or weaker CPUs | Start conservative, confirm stability, then raise quality where it does not hurt 1% lows. |
| V-Sync | Use VRR plus one cap for smoothness; leave V-Sync off if it adds input delay or sluggish camera movement | V-Sync can fix tearing, but plain fixed-refresh V-Sync can add latency. Test it instead of leaving it on by habit. |
| FPS limit | Cap to 60, 45, or 30 based on what your PC can hold in busy online areas | One good limiter is cleaner than several fighting each other. |
| Upscaling / resolution | Native first; use upscaling or lower resolution only if GPU load is the problem | Resolution cuts help GPU bottlenecks, not CPU, network, storage, or shader hitches. |
| Overlays | Disable unused overlays, capture, highlights, and browser-heavy background apps | Overlay hooks can worsen stutter or add inconsistent frame pacing on some setups. |
Best settings by PC type
Display mode, V-Sync, and FPS caps
Online building games can shift bottlenecks. If the GPU is not maxed but FPS still drops, treat CPU load, background apps, and world complexity as suspects.
If you use G-Sync, FreeSync, or another variable refresh rate display, cap slightly below your monitor refresh ceiling when you want capped tear-free play. That keeps the game inside the VRR range. If you care only about the lowest possible input delay, V-Sync Off and a clean in-game cap can feel better, but tearing may be visible.
Use the in-game limiter first when it behaves well. If the game lacks a useful cap or the pacing is uneven, try a driver cap or RTSS, but do not leave multiple caps active at the same time. Average FPS can lie; smooth frametimes matter more than a pretty number in the corner.
What to lower first
Lower the overall preset first if the game offers only a small settings menu. If more individual options are available, reduce shadows, reflections, volumetric effects, ambient occlusion, and view distance before touching texture quality. Textures usually hurt when VRAM is full; they are not always the first FPS lever.
When the game feels smooth in one area and rough in another, avoid global panic-tuning. Test whether the problem happens during asset streaming, menus, online activity, heavy effects, or fast camera movement. Different symptoms need different fixes.
Repeatable test route
Use the same route every time
Low-end and laptop tips
On laptops, plug in the charger, use the high-performance GPU mode, and check temperatures before blaming the game. Thermal throttling can look like random FPS drops. If your CPU or GPU clock speed falls after a few minutes, a lower FPS cap can feel smoother than pushing the machine until it downclocks.
For 8 GB RAM systems, close browsers, launchers, RGB tools, recording software, and unused overlays before starting SpaceCraft. Extra background load can hit 1% lows harder than the graphics preset suggests.
Online and co-op smoothness checks
If SpaceCraft feels worse online than solo, separate local FPS from connection behavior. Local stutter usually shows as uneven frame delivery or GPU/CPU spikes. Network problems show as delayed actions, rubber-banding, teleporting players, or interactions that respond late even while FPS looks fine.
Use wired Ethernet if possible, pause downloads, avoid VPN routing unless you need it, and test one match or co-op session after changing display sync. Do not judge online smoothness from a menu or tutorial area.
Clean up the PC before blaming one setting
Hone can help trim background load, clean up Windows gaming settings, and keep your PC closer to a stable baseline before you tune SpaceCraft. It will not magically rewrite the game engine, but it can remove avoidable PC-side noise from your tests.
Best final settings summary
For most players, the best SpaceCraft settings are simple: use a sensible preset, target the FPS your PC can hold, keep one limiter active, disable unused overlays, and test the same route before making more changes. Raise visuals only after the game is already stable.
FAQ
Why is SpaceCraft using so much CPU?
Simulation, online activity, building systems, background apps, and world complexity can all raise CPU load. Lowering GPU-only settings may not fix a CPU bottleneck.
Should I use 30 FPS or 60 FPS?
Use 60 FPS if recommended hardware can hold it in busy areas. Minimum-spec PCs should prefer a stable 30 FPS over unstable 45-60 FPS swings.
Does lowering resolution fix online stutter?
Only if the GPU is the bottleneck. If CPU usage, network delay, or server-side behavior is the issue, resolution changes may barely help.
Youtube