You line up a headshot. The target jitters for a split second. Your mouse feels like it drags through mud. Then you lose the trade and wonder why Highguard feels inconsistent even though your PC should be fine.
This guide covers the best Highguard settings for FPS, stability, and visibility on PC. You will get a clean in game preset using only settings that actually exist in Highguard’s Settings > Video menu, plus a clarity fix that helps when the game looks softer than it should.
Low Latency Baseline
Settings That Affect Aim Feel
- Windowed Mode: Fullscreen
- V-Sync: Off
- Max FPS: Uncapped
- Resolution: Match Your Monitor
Biggest FPS Wins
Cut Costly Effects First
- Internal Resolution: 70%
- Shadow Quality: Low
- Global Illumination Quality: Low
- Effects Quality: Low
Avoid Unwanted Blur
When The Image Looks Soft
- Post-Processing Quality: High
- Anti-aliasing Quality: High
- Texture Quality: High (VRAM dependent)
- Foliage Quality: Low (less clutter)
Best Highguard Settings For FPS
If you only want a fast, competitive Highguard FPS boost, copy the preset below. Every option listed here exists in Settings > Video under the Display and Graphics sections.
Highguard FPS Settings Quick Reference
Highguard Video Settings Presets
The table below shows two presets: one built for maximum FPS, and one built for high FPS while keeping the image sharper for long range tracking. Both use only real Highguard settings.
Best Highguard PC Settings For FPS And Clarity
| Setting (In Game Label) | Max FPS Preset | High FPS Plus Clarity | Why It Matters |
|---|---|---|---|
| Windowed Mode | Fullscreen | Windowed Fullscreen | Fullscreen often feels snappier. Windowed Fullscreen is easier for fast alt tabbing. |
| Resolution | Match Your Monitor | Match Your Monitor | Keep output resolution stable, then use Internal Resolution to reduce render load. |
| V-Sync | Off | Off | V-Sync can add latency by waiting for the next refresh cycle. |
| Max FPS | Uncapped | Uncapped (or cap to refresh) | Uncapped reduces input to pixel delay. Capping can smooth pacing and reduce heat. |
| Field of View (FOV) | 90 | 100 | Higher FOV improves awareness but can cost some FPS and makes targets look smaller. |
| Brightness | Personal preference | Personal preference | Higher brightness can help spot movement in darker areas. Too high can wash out contrast. |
| Global Quality | Custom | Custom | Custom keeps control on the settings that actually move FPS. |
| Internal Resolution | 70% | 100% | This is the biggest FPS lever. Lower values raise FPS fast, but reduce fine detail. |
| Anti-aliasing Mode | DLSS / TSR | DLSS / TSR | Use DLSS on Nvidia GPUs. Use TSR when DLSS is not available. |
| Shadow Quality | Low | Low | Shadows are expensive and do not win fights. Low keeps visibility cleaner. |
| Global Illumination Quality | Low | Low | Lower lighting complexity frees GPU headroom for firefights. |
| Reflection Quality | Low | Low | Reflections are costly and rarely worth the trade for competitive play. |
| Anti-aliasing Quality | Low | High | Low is faster. High reduces shimmer and helps tracking if your FPS remains stable. |
| Texture Quality | Medium | High | Mostly VRAM dependent. If you stutter or hitch, drop this before touching core FPS levers. |
| Effects Quality | Low | Low | Particles and heavy effects can spike frame time when multiple players collide. |
| Post-Processing Quality | Low | High | Low boosts FPS, but can also make the image look softer. High keeps the picture sharper. |
| Foliage Quality | Low | Low | Lower foliage reduces visual clutter and improves enemy visibility in dense areas. |
| Shading Quality | Low | Medium | Low saves GPU time. Medium can improve material readability without being as costly as shadows. |
Post-Processing Quality Can Cause Extra Blur
If Highguard looks blurrier than expected, Post-Processing Quality is the first place to look. In some setups, lowering it can make the whole image feel softer even when your output resolution is correct.
Best Highguard Display Settings For FPS
Display settings are where you remove hidden latency and stop accidental FPS caps. They also keep your output resolution consistent so your crosshair and UI stay clean.
Windowed Mode
Fullscreen is the best starting point for competitive Highguard PC settings because it prioritizes consistent frame delivery and usually reduces input delay. If you alt tab constantly, Windowed Fullscreen is a good compromise that keeps the game stable while making desktop switching painless.
Resolution
Set Resolution to match your monitor. If you need more performance, lower Internal Resolution first. That approach keeps your UI readable while still giving you a major FPS increase.
V-Sync
Keep V-Sync off for best Highguard FPS and the lowest input delay. If you hate tearing, consider using a frame cap instead of turning V-Sync on. A stable cap often feels better than buffering frames.
Max FPS
Set Max FPS to Uncapped if your goal is maximum FPS and the fastest possible response. If your GPU runs hot or your frame time feels uneven, cap to your monitor refresh rate. The best setting is the one that stays stable in real fights, not only in empty areas.
Best Highguard Graphics Settings For FPS
Most of your performance comes from a handful of graphics options. In Highguard, you will get the biggest gains by cutting render resolution and heavy lighting first, then shaving effects that spike in combat.
Internal Resolution
This slider controls how many pixels the game actually renders before scaling to your chosen output resolution. Dropping it from 100% to 70% is one of the fastest ways to get a Highguard FPS boost on mid range hardware. If you start missing targets because the image is too soft, raise it back toward 85% to 100%.
Shadow Quality, Global Illumination Quality, Reflection Quality
Set all three to Low for best Highguard performance settings. These options are high cost and low value in PvP because they spend GPU time on lighting details that do not help you win aim duels.
Effects Quality
Keep Effects Quality at Low to reduce frame time spikes during explosives and high ability moments. High average FPS means little if micro-stutters show up the moment the screen fills with particles.
Texture Quality
Texture Quality is mostly a VRAM check. If you have enough VRAM, High can improve clarity with a small FPS hit. If you see hitching when turning quickly or entering new areas, drop textures to Medium first and then retest.
How To Apply The Best Highguard Settings
Highguard Settings Setup In 60 Seconds
Go to Settings, then select the Video tab. You will see Display and Graphics sections.
Set Windowed Mode to Fullscreen, V-Sync to Off, and Max FPS to Uncapped. Keep Resolution matched to your monitor.
Set Global Quality to Custom. Start with Internal Resolution at 70%, then set Shadows, Global Illumination, and Reflections to Low.
If the image looks too soft, raise Internal Resolution first. Then set Post-Processing Quality to High for a sharper picture.
Run the settings in a live match, not just a quiet area. Your best Highguard settings are the ones that hold stable FPS when effects, foliage, and players collide.
Extra Highguard PC Optimization Tips
In game settings do most of the heavy lifting, but system cleanup can improve consistency. A stable frame time is often more important than chasing a bigger number, especially if your target is good FPS that stays steady in fights.
- Update your GPU driver and restart your PC before long sessions.
- Enable Windows Game Mode to reduce background interruptions.
- Close overlays you do not need (recording software, browsers, extra launchers).
- If you are memory constrained, reducing background apps can matter more than another graphics cut. Checking your RAM configuration can prevent paging related hitching.
Conclusion
The best Highguard settings for FPS come down to three moves: remove latency traps in Display settings, drop Internal Resolution to a sensible value, and cut heavy lighting and effects that spike in combat. If Highguard looks blurrier than it should, treat Post-Processing Quality as a clarity toggle and raise Internal Resolution before you sacrifice visibility.
FAQ
What are the best Highguard settings for FPS
Set Windowed Mode to Fullscreen, set V-Sync to Off, set Max FPS to Uncapped, set Global Quality to Custom, drop Internal Resolution to around 70%, and keep Shadow Quality, Global Illumination Quality, and Reflection Quality on Low. These settings maximize FPS while keeping fights readable.
Should I use V-Sync in Highguard
No. V-Sync can add latency by buffering frames to sync with your monitor. For competitive play, keep V-Sync off and use a frame cap if you want steadier pacing.
What does Internal Resolution do in Highguard
Internal Resolution controls how many pixels Highguard renders before scaling to your chosen output resolution. Lowering it is the fastest way to boost FPS, but it reduces fine detail and can make distant targets harder to see.
Why does Highguard look blurry on PC
Highguard can look blurry if Internal Resolution is low, if Anti-aliasing Quality is low, or if Post-Processing Quality is set low and makes the image softer. If the image is too soft, raise Internal Resolution first, then set Post-Processing Quality to High for sharper output.
Which Highguard graphics settings impact FPS the most
Internal Resolution has the biggest impact, followed by Shadow Quality, Global Illumination Quality, and Post-Processing Quality. Effects Quality can also cause major frame time spikes during intense fights.
Discord
Instagram
Youtube
TikTok