Best Skate 4 Settings for PC – Optimize Performance Quickly

Muhib Nadeem / October 1, 2025 / 9 min read
Note: This article reflects the author’s recommendations and does not necessarily reflect the views of Hone.

You just installed skate. on PC and want smooth, snappy lines fast. This guide gives you a rapid, no‑nonsense settings plan that trades guesswork for results. Apply the three quick tweaks, then fine tune with the recommended graphics, driver, and Windows settings below.

Important context: skate. is an always online live game, so server health and your connection can affect feel even when FPS looks high. That’s why this guide tackles both PC performance and network checks so you can diagnose and optimize in minutes.

Skate 4 PC Lag: Low FPS vs Network Slow Motion

Start here: diagnose in 30 seconds.

🖥️

Performance Lag on PC

  • 1
    Looks like a slideshow; FPS counter dips hard
  • 2
    Menus stutter; camera pans hitch
  • 3
    GPU usage or temps spike, fans roar
  • 4
    Lowering resolution clearly helps

→ Jump to PC Speedrun Fixes

🌐

Network Lag and Rubberbanding

  • 1
    Skater teleports or moves in syrup when crowds appear
  • 2
    Tricks register late despite high FPS
  • 3
    Feels fine solo; degrades in busy spots or servers
  • 4
    Occasional connection lost errors

→ Jump to Network Checks

Quick Skate 4 PC Performance Fixes (3 Minute Setup)

Fix Priority Checklist

1
Switch to Exclusive Fullscreen and Cap FPS
Set Window Mode: Fullscreen (not Borderless). Cap to a steady target (60, 90, or your monitor’s easy multiple). This reduces slow motion or latency spikes around crowds.
60–90 seconds
2
Global Illumination to Static
It’s the single biggest lever for FPS stability in San Vansterdam. Change it, then restart the game if lighting looks odd.
30 seconds
3
Enable Upscaling (FSR or XeSS) at Quality
Quality mode retains sharpness while easing GPU load. DLSS support is planned, with current in‑game options for FSR and XeSS.
30 seconds
💡 Controller Required on PC
During Early Access, PC requires a controller. If inputs feel inconsistent, use a wired connection and update controller firmware.

Skate 4 PC Presets for 1080p and 1440p

Choose the card that matches your goal. Each links to a ready to apply preset you can copy in under a minute.

How to Fix Skate 4 Slow Motion on PC

Some PC players report the whole simulation feeling slow, especially around other players, even when the FPS counter says 60+. The most consistent mitigations have been: switch to Exclusive Fullscreen, set a steady frame cap (start at 60), and avoid Borderless if you see latency spikes. If crowds still cause slow motion, try a lower cap (45 to 50) to stabilize the simulation.

PC Only

Exclusive Fullscreen and Frame Cap

  1. Window Mode: Fullscreen (not Borderless)
  2. Frame Rate Limit: 60 (raise later if stable)
  3. V Sync: Off (use G Sync or FreeSync if available)
  4. If crowds still slow: try a 45 to 50 cap
Why it helps: Reduces compositor overhead and keeps frame times predictable under server load.
PC Only

FSR or XeSS at Quality

  1. Upscaling Method: FSR or XeSS
  2. Upscaling Quality: Quality
  3. Dynamic Resolution: Off
Status: Early Access includes FSR and XeSS options. DLSS is planned.
PC Only

Stability Tweaks for Smooth Frametime

  1. Update GPU driver (NVIDIA, AMD, or Intel)
  2. Windows: Game Mode On; Power Plan High Performance
  3. Disable overlays (Discord, GeForce Experience, Afterburner)
  4. EA App: Help > App Recovery > Clear Cache
Fixes: Random stutters, launch hiccups, corrupted downloads

Best Skate 4 PC Graphics Settings (Quick Wins)

Apply these settings first, then nudge quality upward until you hit your target FPS.

PC Graphics Optimization
Overall Impact
Global Illumination
Biggest FPS lever. Dynamic lighting looks great but costs a lot.
Set to Static
High FPS gain
Upscaling Method
Use FSR or XeSS now. DLSS support is planned.
Quality Mode
High FPS gain
Texture Quality
VRAM heavy. Drop if you see stutter after long sessions or at 4 GB VRAM.
High (Medium on 4 GB VRAM)
Medium gain on older GPUs
Shadows and Effects
Lowering shadows affects look less than lighting does.
Shadows: Medium
Medium gain
Depth of Field and Motion Blur
Cosmetic; can mask clarity during lines.
DoF: Low • Blur: Off
Small to medium gain
V Sync and VRR
Prefer G Sync or FreeSync for smoothness; avoid double syncing.
V Sync Off (VRR On)
Lower input latency

Best Skate 4 Settings for 1080p 60 FPS on PC

Copy these, then raise eye candy slowly until frame time spikes appear.

1080p / 60 – Recommended

  1. Window Mode: Fullscreen • Refresh: Monitor default
  2. Frame Limit: 60 • V Sync: Off (VRR On)
  3. Dynamic Resolution: Off • Upscaling: FSR or XeSS Quality
  4. Global Illumination: Static
  5. Textures: High (Medium on 4 GB VRAM) • Texture Filtering: High
  6. Shadows: Medium • Effects: Medium • Mesh: High
  7. Ambient Occlusion: Medium • Depth of Field: Low • Motion Blur: Off
Goal: Tight input feel and stable frametimes on GPUs in the RTX 3060 or RX 6600 XT class.

Best Skate 4 Settings for 1080p 90-120 FPS on PC

High Refresh Flow

  1. Cap to 90 to 120 depending on your monitor and CPU headroom
  2. Upscaling: FSR or XeSS Quality (drop to Balanced if needed)
  3. Global Illumination: Static • Shadows: Medium or Low
  4. Post Processing: Medium • Motion Blur: Off • Depth of Field: Low
Tip: If slow motion appears in crowded hubs, lower the cap by 10 to 15 FPS to stabilize the simulation.

Best Skate 4 Settings for 1440p 60 FPS on PC

1440p / 60 – Quality First

  1. Upscaling: FSR or XeSS Quality for edge clarity
  2. Global Illumination: Static • Textures: High (watch VRAM)
  3. Shadows: Medium • Effects: Medium • Mesh: High
  4. Cap: 60 • VRR On • V Sync Off
Hardware: Expect to sit near or above recommended specs with upscaling enabled.

Skate 4 PC System Requirements and Hardware Targets

Targets and Hardware

TargetCPUGPURAMNotes
1080p / 30 FPS (Low) i5‑6600K / Ryzen 3 3100 GTX 1050 Ti / RX 460 (4 GB) 8 GB Minimum spec
1080p / 60 FPS (Medium) i7‑9700 / Ryzen 5 3600 RTX 3060 (12 GB) / RX 6600 XT (8 GB) 16 GB Recommended spec
1440p / 60 FPS (High) Same class + Upscaling (FSR or XeSS) recommended 16 GB Watch VRAM usage
4K / 60 FPS (Ultra) 8 core modern CPU Upper mid to high end + upscaling 32 GB Upscaler essential

Controller is required during Early Access.

Skate 4 PC Network Optimization and Lag Checks

If your inputs feel delayed or syrupy only around other players, sanity check your connection before chasing graphics tweaks. skate. requires a persistent internet connection, which means server health and packet loss can affect gameplay feel.

Network Diagnostic Commands
Windows:
C:\> ping -n 50 1.1.1.1
Good: ~0% packet loss, <50 ms average
Bad: >2% loss or >150 ms average
Tip: Use wired Ethernet and enable router QoS to prioritize gaming if your household streams or downloads heavily.

Advanced Skate 4 PC Optimization Tips

Windows

Power and Background Apps

  1. Power Plan: High Performance
  2. Windows Game Mode: On
  3. Disable Xbox Game Bar or Background DVR if not using it
  4. Close FRAPS or Rivatuner overlays if frametimes spike
GPU

Driver and Control Panel

  1. Update to the latest Game Ready or Adrenalin driver
  2. NVIDIA: Low Latency Mode On; Prefer Max Performance
  3. AMD: Anti Lag+ where supported and cap to match your in game limit
Goal: Cleaner frame pacing with your chosen in game cap
EA App

Clear EA App Cache

  1. EA App > Help > App Recovery > Clear cache
Helps with: Login loops, failed downloads, and launch problems

Final Recommendations

For most PCs, the fastest path to smooth skating is simple: Fullscreen plus an FPS cap, Global Illumination set to Static, and FSR or XeSS at Quality. Once that baseline is stable, nudge shadows, mesh, and texture quality up until frame times wobble, then back off one notch. If things only fall apart in busy servers, check your connection and keep a conservative cap.

FAQ

Does skate. have an offline mode on PC?

No. skate. is designed as a live, always online sandbox. A persistent internet connection is required at all times.

Which upscaler should I use in Skate 4 on PC: DLSS, FSR, or XeSS?

In Early Access, skate. includes FSR and XeSS. Use FSR on AMD or NVIDIA, and XeSS on Intel or NVIDIA. DLSS support is planned.

Why does Skate 4 feel like slow motion on PC even at 60 FPS?

This is a common Early Access complaint tied to crowded areas or servers. Community fixes that help: use Exclusive Fullscreen (not Borderless) and cap to a steady target (start at 60; lower if crowds still cause slow motion).

What are the official Skate 4 PC specs?

Minimum: i5‑6600K or Ryzen 3 3100, GTX 1050 Ti or RX 460 (4 GB), 8 GB RAM. Recommended: i7‑9700 or Ryzen 5 3600, RTX 3060 (12 GB) or RX 6600 XT (8 GB), 16 GB RAM. Controller required during Early Access.

Keyboard and mouse do not work in Skate 4 on PC – is that a bug?

Not a bug. PC currently requires a controller. If inputs feel laggy, use a wired connection and keep controller firmware up to date.

Which single setting boosts FPS the most in Skate 4 on PC?

Global Illumination to Static typically delivers the largest stability and FPS improvements, especially when combined with a sensible FPS cap.

Where can I find Skate 4 patch notes and updates?

Watch official announcements in the game client and on EA channels. We also cover notable performance updates on the Hone blog.

Full Performance,
No Cost

Kick off an exciting adventure for free! Just download the app, create your account, and enjoy up to 20 optimizations at no cost.

Muhib Nadeem

Muhib Nadeem

I grew up on frame drops, boss fights, and midnight queues. Now I write about games with the same energy I once saved for ranked.

Level Up
Your FPS

Kills background lag

Instant FPS boost

One-click setup

Table of Contents

You may also like